You can add new life to your NiMH or NiCD laptop battery by placing it in a tightly-sealed plastic bag and freezing it for 12 hours. If you have a Lithium Ion or Lithium Polymer battery, however, freezing it is actually dangerous. Instead, consider doing a battery calibration, which will both restore and prolong your battery power. While these methods won’t make your battery as good as new (you may only gain about thirty minutes of extra charge time from an older battery that no longer holds a charge), they will help you get the most of your battery until you can buy a new one.

1. Reviving a NiMH or NiCD Battery in the Freezer

Turn the computer off, then open the battery cover (typically on the bottom of the laptop). If the battery says something like Li-ion, Li-on, Li-ion II, Lithium, LiPo, you do not have the proper battery for this method.

If you are unable to read the text on the battery (perhaps it rubbed off), call your computer manufacturer to find out, or use a different method.

If your NiMH or NiCD battery no longer holds a charge at all, this method may only get you an additional 30 minutes or so of battery charge capability, which is much better than 0 minutes. If the battery is simply draining too quickly, you may be able to get better results with this method.

2. Re-calibrating Any Laptop Battery

Re-calibrating the battery fixes issues where the battery meter on your laptop no longer appears accurate. It also does a complete discharge and recharge, which can add extra life to your battery.

3. Performing a Full Recharge

Doing a full recharge will work on any laptop hardware, no matter the battery type. Try this method if your battery is draining more quickly than it used to.

asilo battery computer fix fujitsu how-to problem repair siemens

3:48 AM

Sometimes when you're calling a friend or surfing the internet, you goy disconnected. Once checked, the signals is used to weaken.

In addition to seeing the number of signal bars on your phone, there are other ways to check the signal strength.

When using Android, simply go into Settings, About and then click Network. Furthermore, the signal strength will be indicated in miliwatts decibels (dBm).

When using iPhone, try pressing * 3001 # 12345 # on the dial pad. You will be brought into Field Test menu and bar signal will change to units of dBm.

The signal at -100 dBm signal indicates that you get the worst quality. -70 DBm while the figure indicates the quality of the phone signal is good.

Now, after having access to check signal strength, try the following steps to get the best signal you can get.

1. Create a map signal

Suppose you were inside the house. Turn on the field test mode or go to Settings to view the signal strength indicator.

Subsequently go from point to point in the house to see how the signal strength you get there. Mark each point on the map.

In this way, it is easy to find a point anywhere that has a strong signal. Every time you call, do at that point so that his voice clear.

2. Airplane mode

Replace Airplane Mode for three seconds, then turn off airplane mode. This will refresh the connection to the mobile network operator you use.

iklan

In addition it could be your phone will connect to the transmitter signal is located closest to the location of the call. Thus, the signals transmitted and received by mobile phones will be more powerful, sound even more clear when you call.

3. Open the window

When you are inside the house and feel the sound dashed during a call, open the window and stood nearby.

Now, if the voice dashed that happens when calling from within the car. Do the same thing, open the window.

In this way, the signal emitted from the outside can be captured by the phone without having to penetrate the barrier. Moreover, metallic materials in the car body including material impenetrable cellular signal.

4. It checks the battery?

If the SMS messages that you send it turns out delay, try to check the phone battery. Smartphone will typically implement power saving mode when the battery is low.

This mode may be cut off while the connection to the network, because to move a connection from one transmitter to another transmitter is consuming a lot of power.

Well, if it turns out the problem of signal on a cell phone caused this, just charge it and everything will be finished.

5. Approach the transmitter signal

First, you must download and install the app on your Android phone OpenSignal. This application can be used to check how many signal transmitter tower in around you.

When a voice call falters, try to find the nearest transmitter and walk toward him.

Thus you can get a stronger signal, and automatic phone connection leads to the transmitter.

android gadget how-to iphone

6:47 AM

Utilization of augmented-reality technology could practically be the main attraction of the game Pokemon Go. However, its implementation is not small battery consuming.

In just two hours driving around looking for a Pokemon, the smartphone battery can be left only 10 percent of the full initial conditions. It is certainly disturbing the user, especially if it was playing.

The unrest was quelled by some means. One of the simplest is to activate the battery saver feature on Pokemon Go application.

Players simply press the icon at the bottom of the interface Pokeball game. Afterwards, press the settings on the upper right side. In it there is an option to enable battery saver mode.

Mode that allows the screen automatically dim when the player put the phone in the bag. By doing so, users can save valuable battery piece when chasing Pokemon locations previously identified.

If the battery is quickly sucked, there are other ways that can be used. Users can download map data from Google Maps.

The idea was first mentioned by a Reddit user with the account name and throwaway96388 _killbunny_. Here are the full steps.

iklan

1. Open the Google Maps app on the smartphone.
2. Press the menu three lines "hamburger".
3. Select the setup menu (Settings).
4. Select the option "Offline areas."
5. Press the territory of recommendations titled Home and press the '+' button at the bottom right of the screen to select a specific area other Maps.

With the first download maps Maps, Pokemon Go application does not need to constantly synchronize the user's location. This mechanism is claimed to save battery significantly, exceeding the battery saver mode.

Besides saving the battery, the mechanism downloads these maps can also save the Internet data users. Good luck!

android gadget how-to pokemon go

4:59 AM

Google has upgrade search engine services. Now the Google search results page will immediately display the lyrics of the songs more quickly if a user is searching with keywords the title song.

Before the release of this feature, users must pass at least some steps to search for song lyrics. First, the user must type the title song whose lyrics you want to search.

Then, the Google search engine will show you which sites contain the lyrics. Lastly, the user must click one of these links.

Now, users do not need to click the search result link, instead Google will display the lyrics directly on the search page. To display the lyrics of the song in the search results, users can simply type the title song followed by the word "lyrics" behind it.

By displaying the lyrics of the song directly on the search page, at least users can save time without having to open a web page that contains the lyrics.

Google itself in cooperation with a company from Toronto, Canada, LyricFind, for this lyrics feature.

Cooperation between Google and LyricFind it says could be a source of additional income for musicians and publishers.

"Everything is based on usage. Royalties will be paid based on the number of lyrics you see. The more views, more publisher will paid," said CEO and co-founder of LyricFind Darryl Ballantyne.

Google how-to Search

10:54 AM

Those fresh Windows 10 apps possess concur to operate inside the history so as to update their particular live tiles, fetch fresh facts, as well as obtain notifications. Despite the fact that never ever perhaps touch them, they may empty several power supply. And you can easily command which often apps are generally allowed to work inside the history. Despite the fact that complete make use of wide-spread apps, a person don’t always would like them working inside the history. As an example, automatically, apps just like the “Get Office” app–which simply is available in order to bug a person regarding getting Microsof company Office–have concur to operate inside the history.

Prevent Specific Software From Running inside the Background

Software possess possess concur to operate inside the history will probably appear within the power supply application display screen, which often estimates simply how much energy every one utilizes on your technique. And you don’t must hang on for them to commence wearing power supply power–if a person don’t have used them, a person might as well disable them at the moment.

To discover which often apps possess concur to operate inside the history, start the beginning menus or Start display screen and select “Settings. ” Click on or tap the actual “Privacy” icon inside the Options screen.

Scroll into the lower on the checklist and choose “Background apps. ” You’ll discover a directory of apps that have concur to operate within the history with the “On/Off” toggle. Your default setting for each and every request can be “On, ” enabling each and every request to operate within the history if it enjoys. Established any kind of apps you don’t want to manage within the history in order to “Off. ”

Please remember there’s a disadvantage to the. Should you stop the Wireless house alarms request through managing within the history, by way of example, any kind of wireless house alarms you fixed won’t turn off. Should you stop the Mail request through managing within the history, it won’t inform you regarding brand-new emails. Software normally manage within the history in order to revise their stay tiles, obtain brand-new data, in addition to acquire announcements. If you wish a good request to stay carrying out most of these features, you must let your catch go on managing within the history. Should you don’t proper care, really feel liberated to stop the request through managing within the history. You'll be able to still use the request normally, although maybe you have to await correctly in order to fetch brand-new data after you launch it.

how-to Windows

10:14 PM

Welcome back, now we will teach you about image editing. We use the best image editor Adobe Photoshop. We use the Adobe Photoshop CS4 its old but it still gold, very usefull. Ok, we will teach you make a good picture of blending multiple picture into 1 awesome picture.

1. Prepare your material.

2. Open Your Adobe Photoshop (we are using CS4) and create new project.

3. Drag and drop your picture into Adobe Photoshop

4. Its should look like this after you drop the picture into Adobe Photoshop Software

5. Now Copy all the picture to the project you have created. how?

block all the layer ctrl+a then ctrl+c move to the project then ctrl+v.

6. Now it will look like this

if picture size is bigger or smaller resize it to match the project canvas size

7. Then use eraser and choose hardness 0% and big diameter to clear and make smooth blending

8. Its smooth enough.

9. Im croping the sea cloud picture to make it more cool.

10. Tada.... your amazing creation is done.

how-to photoshop

11:42 AM

Whati is CMD?

Wikipedia said that Command Prompt, also known as cmd.exe or cmd (after its executable file name), is the command-line interpreter on Windows NT, Windows CE, OS/2 and eComStation operating systems.

Now we want to customize the old ugly CMD into good looking CMD with simple step.

1. Run CMD as Administrator

Your Command Prompt CMD window will look like this below. This is the standard of Command Prompr window display themes or look. But its ok, you can modify as you want, its very easy. The CMD is located in drive C in my computer or in your drive where the windows installation is located. the full path of the location is C:\Windows\System32\cmd.exe. You can open directly from that folder or directory.

2. When the Command Prompt Window Opened. Right Click the title bar on the top.

After you click that menu a pop up window of Command Prompt properties will be shown up. look the picture below.

Now you can modify the Command Prompt as you want. Be creative, build your own cmd themes, and have fun. And this is My Command Prompt CMD look like now.

Pretty cool!

CMD Customize how-to Windows

9:28 AM

Nerdfeed, now we want to give you learning about browser. The internet browser is Mozilla Firefox.

Now we want to install it, chek it out.

Before installing the browser (mozilla firefox), make sure that your computer is beyond the System Requirements. Here is the mozilla firefox System Requirements :

Windows Operating Systems (32-bit and 64-bit)

• Windows XP SP2
• Windows Server 2003 SP1
• Windows Vista
• Windows 7
• Windows 8
• Windows 10

*note that 64-bit builds of Firefox are only supported on Windows 7 and higher.

Recommended Hardware

• Pentium 4 or newer processor that supports SSE2
• 512MB of RAM
• 200MB of hard drive space

If your computer meet the System Requirement lets go to install it.

1. Go to Firefox website to download here.

The Firefox download page on that link automatically choose the best version of Firefox for your computer. If you want to download a full, offline installer or if you want to choose the language and operating system by yourself, visit the Firefox System and Languages page here. You can download either the Windows (32-bit) Firefox version or, for 64-bit operating systems with Windows 7 and above, the new Windows 64-bit version of Firefox.

2. Click the Free Download button to download the Mozilla Firefox installer

That page will automatically give you the best version of Firefox for your computer.

Alternatively, use this download link for the latest English (U.S.) Firefox version.

3.  Open the installer file you have downloaded.

4. Follow the installer step.

5. You Should see this icon in your desktop

Congratulations, you are done installing Firefox!

Now, click the mozilla firefox icon to start your internet journey.

Firefox how-to Install Mozilla

9:09 AM

Taking a screenshot on your telephone is one of its most fundamental capacities, however the Galaxy Note 5 has a trap up its sleeve that offers it some assistance with going admirably past a standard one-screen catch. In spite of the fact that regardless you have two basic approaches to take a customary full-screen screenshot to share or keep for yourself, there's likewise another alternative called "looking over catch" that lets you consequently line together various screenshots into a full scrollable and editable picture. Here's the manner by which it works.

There's no deficiency of circumstances where taking a basic screenshot is helpful, whether you're demonstrating something to a companion, sparing a brisk bit of data or investigating an issue. There are two courses on the Note 5 to take a standard screenshot.

With a key mix: 

1. Open the substance you wish to screenshot.
2. In the meantime, press and hold both the force catch and home catch for two seconds.
3. You'll see the screen quickly streak, and a notice show up.
4. Check your notices, where you'll see the screenshot and an alternative to share, alter or erase it.

With a palm swipe: 

1. Open the substance you wish to screenshot.
2. Place your hand vertically along the left or right edge of your Note 5, and swipe in from that edge with your hand touching the screen.
3. You'll see the screen quickly streak, and a notice show up.
4. Check your notices, where you'll see the screenshot and an alternative to share, alter or erase it.
5. (Discretionary) If this strategy doesn't work, check Settings > Motion and motions to empower it.

android how-to samsung screenshot

8:52 AM

Performed you obtain locked from a phone or this acquired misplaced or thieved? This information will reveal this steps for you to enforce a fresh 6-digit PIN for you to lock/unlock the Microsoft windows 10 Cellular phone.

Microsoft windows 10 Cell presents different alternatives for you to signal in to the phone because the first line of security towards neighbor's little brown eyes. If you are a new Microsoft windows Mobile phone person, you currently know a pair of locking parts: the normal PIN password in addition to Microsoft windows Howdy, the brand new function that uses eye reader since a sort of authentication.

On the other hand, 'microsoft' also provides 1 / 3 solution to lock the phone, the 6-digit PIN function which might be allowed through the 'microsoft' Account on the net, in addition to allows you to lock the phone remotely.

The reason why because of this 3 rd locking mechanism would be to include a supplementary covering connected with safety if the phone previously receives misplaced or thieved. As you may configure Microsoft windows Howdy, which can be extremely risk-free, any person may still gain access to this Locking mechanism screen in addition to think the PIN -- even more likely should the product declines to the palms connected with someone you know. Moreover, in the event that for virtually every motive you obtain locked from a phone, you may also arranged a new 6-digit PIN remotely for you to unlock the product without needing to wait around a long time just before trying again.

Within this Microsoft windows 10 information, we shall walk you through the steps to create a new 6-digit PIN for you to lock the phone in addition to the way to go back to your original PIN after you get back real handle of the product.

How you can risk-free the Microsoft windows 10 Cellular phone utilizing a 6-digit PIN

1. Open the web browser in addition to admittance the 'microsoft' Account while using references you happen to be employing on your own phone.

2. With your units, click on the Locate my own phone hyperlink with the product you would like to lock remotely.

3. On the Find My Phone page, click the Lock button.

4. Type in the 6-digit FLAG you wish to work with.

 * Observe: Remember that a whole new 6-digit PIN NUMBER can be all you need for that characteristic to function, yet also you can contain a phone number which you could possibly be gotten to. You can also squeeze in a meaning up to one hundred sixty characters that will look on the Lock display screen.

5. Click the Lock option to complete.

Currently ones cell phone device can lock instantly, in addition to any individual looking to register might find some sort of pop-up meaning together with your personalized text message in addition to telephone back again number. (Only people with all the brand-new PIN NUMBER are able to unlock the telephone. ).

how-to security windows phone

3:08 AM

Microsoft has opened the floodgates for Windows 10, making the upgrade available in 190 countries around the globe. If you've already reserved the upgrade on Windows 7 and Windows 8/8.1 and are yet to see the update, there's an easy fix that allows you to manually initiate the download process.
Before you begin, ensure Windows Update can download and install updates automatically. Not sure how to do that? Here's how:

Turn automatic updating on or off

1. Open Windows Update by swiping in from the right edge of the screen (or, if you're using a mouse, pointing to the lower-right corner of the screen and moving the mouse pointer up), tapping or clicking Settings, tapping or clicking Change PC settings, and then tapping or clicking Update and recovery.
2. Tap or click Choose how updates get installed.
3. Under Important updates, choose the option that you want.
4. Under Recommended updates, select the Give me recommended updates the same way I receive important updates check box.
5. Under Microsoft Update, select the Give me updates for other Microsoft products when I update Windows check box, and then tap or click Apply.

Once automatic updates are enabled, launch Command Prompt in Administrator mode and enter the following command: wuauclt.exe/updatenow. That should trigger the Windows 10 download.

How to start a command prompt as an administrator:

1. Click Start, click All Programs, and then click Accessories.
2. Right-click Command Prompt, and then click Run as administrator.
3. If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Continue.

If you're having any issues, be sure to hit up Windows Central's forums. This discussion is dedicated to force updating.

source : windowscentral

how-to Windows 10

4:18 AM

LAMP Stands for Linux,Apache,MySQL and PHP. Most of the websites works with the above combination. if you think the above combination will be only on servers where the hosting are made, that is wrong you can made on your own PC which has Linux. The installtion of LAMP on Ubuntu is simple quiet when compared to other Linux environment.

In other Linux environment you need to install all the packages separately. But in Ubuntu you can install in one command. Here i am listing the steps to install LAMP in one command.

Installing Linux:

You can find the tutorial about installing Ubuntu 14.10 here.

Installing AMP (Apache,MySQL and PHP).

Copy and Paste the line in the Terminal.

$ sudo apt-get install lamp-server^
[sudo] password for raj:

Once entered the command, it will ask you to enter the password for the user. it will search the required package for LAMP server, in the end it will prompt you to confirm the downloading and installation of packages. Type Y and then press enter.

After the installation of the all packages it will prompt you to configure the MySQL root password. Type new root password for MySQL in the Next Screen.

Repeat the root password.

After that it will continue to install the other packages that are required for AMP.

Testing Apache:

To make sure everything installed correctly we will now test Apache to ensure it is working properly, The default location of the documentroot is /var/www/html, you can place your web pages for your website.

1. Before testing Apache, restart the Apache server.

$ sudo /etc/init.d/apache2 restart

2. Open up any web browser and then enter the following into the web address:

http://localhost/ or http://127.0.0.1

You will get the following page, it means the Apache is working fine. Apache’s default document root is /var/www/html on Ubuntu, the configuration file is /etc/apache2/apache2.conf. Additional configuration files are stored in the /etc/apache2/*-available directory.

Testing PHP:

For testing the PHP, Place one PHP file on to the default directory of the Apache.

Step 1. In the terminal copy/paste the following line:

$ sudo nano /var/www/html/phpinfo.php

This will open up a file called phpinfo.php.
Step 2. Copy/Paste this line into the phpinfo file:

<?php phpinfo(); ?>

Step 3. Now open you’re web browser and type the following into the web address:

http://localhost/phpinfo.php or http://your-ip-address/phpinfo.php

Configuring MySQL:

This is optional, MySQL will normally listen on the localhost only. if you want it to listen on the other IP,  you will need to edit the /etc/mysql/my.cnf file.

$ sudo nano /etc/mysql/my.cnf

Change the following line and put your ip on the place of 127.0.0.1.

bind-address = 127.0.0.1 -------> bind-address = 192.168.12.8

That’s all!. Now the Ubuntu 14.10 is ready with AMP. You can put your web pages in the /var/www/html directory for single site.

source : http://www.itzgeek.com/how-tos/linux/ubuntu-how-tos/setup-lamp-apache-mysql-php-on-ubuntu-14-10.html

how-to LAMP Linux Ubuntu Webserver

2:13 AM

What is XAMPP?

XAMPP is the most popular PHP development environment

XAMPP is a completely free, easy to install Apache distribution containing MariaDB, PHP, and Perl. The XAMPP open source package has been set up to be incredibly easy to install and to use.

1. In your web browser, go to  https://www.apachefriends.org/

2. Click on the download link XAMPP for Windows. 

 

3. When prompted for the download, click "Save" and wait for your download to finish.

 

4. Open XAMPP installer file you have downloaded. Install the program, and click on "Run."

5. Accept the default settings. A command will open and offer an initial installation prompt. Just hit the Enter key, and accept the default settings. To simplify installation, just hit ENTER when prompted on the command line. You can always change settings, by editing the configuration files later.

 

 

6. When your installation is complete, exit the command window by click finish. And then

Start the XAMPP Control Panel.

 

7. Well Done!

 

how-to XAMPP

11:37 PM

For all people who wished to enjoy Vainglory on the LAPTOP OR COMPUTER, that can be done that right now!

We have a totally free software named BlueStacks, which you may get here on their website www.bluestacks.com

The key reason why its works is because BlueStacks is surely an Android mobile phone emulator. Therefore that BlueStacks functions while on an operating system that functions exactly like a operating system in a gadget. This allows people to help get apps in the google play store and also enjoy it on the LAPTOP OR COMPUTER, and also suppose which application just released in the google play store.

ALERT: BlueStacks is really a totally free software to help get and also utilize. To hold it totally free, it's going to occasionally request you to get totally free apps -- which you may rub out later when they consume excessive memory space -- if you don't invest in a ad-free version. OTHER THAN THAT, BLUESTACKS WILL NOT PROMOTE ANY OTHER OFFER. If you need to purchase the programs, or perhaps it tempts one to buy points, you could have an unacceptable method.

Here's a pic of what it should look like upon loading. If you already have an Android account, it works on BlueStacks. If not, bluestacks will ask you to make one, it should take no more than 10 minutes.

When you have almost everything set up, this is most of your main menu. It is going to indicate virtually any game titles you've downloaded, and monitor the applications. To get to Google Play Store, simple just click the "Search" button on top still left.

Now, look at here! Vainglory, now on Google Play! And it's free, too!
When attempting to download,if you have not established the payment process, it is going to request to do so. Tend not to be concerned, this element may be missed. Such as When i mentioned, this system in essence operates much like a great android mobile phone system.

Its ready, just download and play it! enjoy!

bluestacks how-to vainglory

11:18 PM

What is ionic?

Ionic is a powerful HTML5 SDK that allow you build native-feeling mobile apps using web technologies like HTML, CSS, and Javascript. You can build android, ios and windowsphone apps at a single time.

How to Install it on Windows 10?

1. You Need Node JS installed on your windows

Download node js on their website nodejs.org. Choose the version what you want (i recommended the LTS one, because it have Long Term Supports) and compatible with your windows version x64 or x86.

After download, you can install nodejs like other normal software installation on windows 10.

2.  Install apache cordova

First, we will go and install the latest version of Apache Cordova, which will take our app and bundle it into a native wrapper to turn it into a traditional native app. Install cordova is simple just open your CMD prompt and insert code below.

npm install -g cordova

if you success your cmd should look like this.

3. Install Ionic

Ionic comes with a convenient command line utility to start, build, and package Ionic apps.
To install it, simply run:

npm install -g ionic

This is what you get after submitting that code.

 

4. Build Your First Apps

Ionic  have been installed, lets start our first journey by build an apps.

ionic start myFirstApps tabs

If ionic success make your apps, then go to folder where your apps in, build it and then run it on the emulator. Im using windowsphone in this example. you can choose diferent platform its up to your devices. (if you want android change "wp8" to "android" or "ios" if you want iOS).

cd myFirstApps
ionic platform add wp8
ionic build wp8
ionic emulate wp8

Adding windowsphone platform using 'ionic platform add wp8'. Your CMD should show this after the execution.

 
Now we build the apps, to get ready.

After the apps succesfully builded, we can run or emulate the apss. And your apps will look like this picture below.

WELL DONE! You have succesfully build your very first appss using ionic. If you want to learn more about ionic you can visit their website in ionicframework.com.

how-to ionic

11:57 PM